What this class licence lets you do
The low interference potential devices (LIPD) class licence allows the use short-range devices.
These devices include:
- wi-fi devices
- wireless microphones
- garage door openers
- telecommand for drones'
- radars including automotive
- home detention monitoring equipment
- personal alarms
- ultra-wideband transmitters
- infrared equipment
- video sender transmitters
- radiofrequency identification (RFID)
- barcode readers.
All users operate on shared frequencies.
The radio-controlled models class licence is for models (such as model ships or planes) that you control with radio frequencies.
Licence rules
You don't need to apply for a class licence or pay any fees.
But you must follow all the rules in the:
For some devices you must follow extra rules:
- in Part 15 – Short Range Equipment Standard of Schedule 5 to the Radiocommunications Equipment (General) Rules 2021 (General Equipment Rules)
- in the electromagnetic energy requirements, as specified in Schedule 4 to the General Equipment Rules
- in the labelling requirements as specified in Schedule 3 to the General Equipment Rules
- from other authorities such as the Australian Therapeutic Goods Administration.
We often update the equipment that is covered under this licence.
You should regularly:
- read the rules in the class licence
- check to see if we have proposed any changes.
Radio quiet zone in Western Australia
You must follow extra rules if you plan to use an LIPD device near Murchison Radioastronomy Observatory.
The observatory is located in central Western Australia.
There is an exclusion zone of 70km around the observatory.
Frequencies for LIPD devices
You can find the frequencies for LIPD devices in the class licence.
If you want to use other frequencies, you must apply for an apparatus licence.
Problems with interference or reception
You cannot get protection from interference under a class licence.
We manage possible interference by restricting:
- the types of devices
- the amount of power a device can have
- areas where you can use a device
- frequencies for some equipment.
The LIPD class licence has rules about places where you can’t use certain devices. This is to protect important stations from interference.
LIPD class licenced devices must not cause interference to radiocommunication services.
Device rules and standards
The device or equipment you operate under the class licence must comply with our technical standards.
These include:
- some general standards – see Schedule 5 to the General Equipment Rules
- the Radiocommunications (Electromagnetic Compatibility) Standard 2017
- the Electromagnetic Energy (EME) Standard – see Schedule 4 to the General Equipment Rules.
Read more about our technical standards including our general radiocommunications standards, the EMC standard and the EME standard.
If your device or equipment does not meet the rules in our technical standards, you will need a permit to supply, use or have it. This is separate from a licence. Find out about permits and fees under the General Equipment Rules.